Daily Maintenance Guide for Soybean Meal and Wheat Bran Feed Packaging Machine

Soybean meal and wheat bran feed packaging machine is a type of equipment used for packaging feed and other materials. If properly maintained on a daily basis, it can not only improve production efficiency but also extend its service life. The following introduces how to maintain the soybean meal and wheat bran feed packaging machine.

I. Inspection and Preparation Before Operation

Safety device inspection

Before using the soybean meal and wheat bran feed packaging machine, be sure to carefully read and understand the operation manual. At the same time, carefully check whether all safety devices, such as warning lights and sound alerts, are in good condition to ensure that the equipment can issue safety warnings normally.

Work area cleaning

The area in front of the soybean meal and wheat bran feed packaging machine needs to be kept unobstructed to ensure that the operator's line of sight is not blocked, guaranteeing observation and judgment during the operation process.

Parts condition inspection

Inspect the parts of the equipment. Any wear or damage to the components must be detected in time and repaired or replaced. When dealing with wires, pipes and other parts, ensure their connections are secure to prevent malfunctions due to unknown reasons.

II. Precautions in Daily Operations

Avoid overloading.

The metering and filling of the soybean meal and wheat bran feed packaging machine should avoid overloading operation. The maximum capacity and the optimal operating range are clearly marked in the operation manual and should be operated in accordance with the regulations.

Real-time monitoring and timely shutdown

When operating the soybean meal and wheat bran feed packaging machine, you must closely monitor the equipment operation and production process. If any abnormal situation is detected, stop the machine immediately and notify the supplier and technicians for maintenance.

Comply with safety regulations.

All local and national safety regulations must be adhered to. Ensure that the soybean meal and wheat bran feed packaging machine is properly grounded and equipped with an effective leakage protection device. At the same time, make sure that the machine has come to a complete stop before power is cut off.

III. Daily Maintenance Procedures

Keep clean and lubricated.

Regular cleaning of the soybean meal and wheat bran feed packaging machine, as well as the cleaning and lubrication of oils, bearings and chains, is of vital importance. Cleaning and lubrication can effectively reduce wear and friction, and help maintain the efficiency and production of the equipment.

Record the operation situation.

After each operation of the soybean meal and wheat bran feed packaging machine, records should be made to track its usage as well as maintenance and repair records.

Replace vulnerable parts.

The vulnerable parts of the soybean meal and wheat bran feed packaging machine, such as cutting knives, guide rails, saw blades, etc., should be replaced in time during use to prevent failure due to time, wear and tear or other reasons.

IV. Regular Maintenance Items

Machine inspection

Check the parts once a month, check the worm wheel, worm, bolts on the lubricating block, bearings and other moving parts whether they are flexible and worn, repair any defects found in time, and do not use them.

Inspection of the transmission system and others

Regular inspections should be carried out weekly or monthly, mainly focusing on the transmission system, power source, connection points, and easily worn parts of the automatic powder packaging machine.

Environmental maintenance

Make sure the soybean meal and wheat bran feed packaging machine is placed in a dry and clean indoor area for use. It must not be used in places where the atmosphere contains acids or other corrosive gases to the machine. At the same time, avoid factors such as humidity and acidity affecting the normal operation of the equipment, and also prevent impurities from entering the packaging system.

Keep up the good work and maintain it.

The machine's box part is equipped with an oil gauge. Before starting the machine, all the oil should be filled up once. During operation, oil can be added according to the temperature rise and running condition of each bearing. The worm gear box must store oil for a long time, and the oil level should be high enough to fully immerse the worm gear. If the machine is frequently used, the oil should be replaced every three months. There is an oil plug at the bottom of the box for oil drainage. When adding oil to the machine, do not let the oil overflow the cup, and do not let it flow to the surroundings or the ground of the machine, as oil can easily contaminate the materials and affect the product quality.

Component cleaning and adjustment

After the machine is finished using or stopped, the rotating drum should be removed for cleaning and the remaining powder in the hopper should be brushed out. Then, it should be properly installed to prepare for the next use. If the drum moves forward and backward during operation, the M10 screw on the front bearing seat should be adjusted to the appropriate position. If the gear shaft moves, the M10 screw at the back of the bearing frame should be adjusted to the appropriate position. The clearance should be adjusted so that the bearing does not make noise. When turning the pulley by hand, the tightness should be appropriate. If it is too tight or too loose, it may cause damage to the machine.

Long-term disuse maintenance

If the machine is to be out of use for a long time, it must be thoroughly wiped clean, and anti-rust oil should be applied to the smooth surfaces of the components. Then, it should be covered with a tarpaulin.

Prepare maintenance plans

For soybean meal and wheat bran feed packaging machines, formulating a regular maintenance plan can help ensure that the equipment operates at high efficiency and guarantee the smooth progress of batch production.