How to maintain the livestock and poultry manure pellet packaging machine? Summary of maintenance po

The livestock and poultry manure pellet packaging machine is a device used for the automatic packaging of granular materials. To ensure its normal operation and extend its service life, regular maintenance and upkeep are very important. Based on the search results, we can summarize the following key points for maintenance:

Regularly inspect the machine parts.

1.Inspection frequency: At least once a month.

Check whether the worm gear, worm, bolts on the lubrication block, bearings and other moving parts rotate flexibly and whether there is any wear. If any defect is found, it should be repaired in time and must not be used with difficulty.

2. Working Environment

Environmental requirements: The machine should be used in a dry and clean indoor environment and avoid operation in an environment containing acids or other corrosive gases.

3. Cleaning and Preparation

Cleaning requirements: After use or when stopping, the rotating drum should be removed for cleaning, and the remaining powder in the hopper should be cleared. Then, it should be reinstalled properly to prepare for the next use.

4. Adjustment and Calibration

Adjustment method: When the drum moves forward and backward during operation, adjust the M10 screw on the front bearing to an appropriate position; if the gear shaft moves, adjust the M10 screw at the back of the bearing housing to an appropriate position to ensure that the bearing does not make noise and the belt pulley is neither too tight nor too loose when turned by hand.

5. Long-term Disuse Treatment

If the machine is to be out of use for a long time, it must be wiped clean all over, anti-rust oil should be applied to the smooth surfaces of the components, and it should be covered with a tarpaulin.

6. Precautions

Safety operation: During the operation of the packaging machine, do not approach it with your hands or other objects; when inspecting or repairing the machine, turn off the power first.

Sound monitoring: Pay attention to whether the machine's sound is harmonious and quickly distinguish abnormal operation sounds before an accident.

Regular inspection: Check every month whether there is any loosening or disconnection at each fastening part of the machine, and apply lubricating oil to each fastening part.

By following the above maintenance points, the normal operation of the livestock and poultry manure pellet packaging machine can be effectively guaranteed, the failure rate can be reduced, and the production efficiency can be improved.