How much is a 1kg powder water-soluble fertilizer packaging machine? How to use it?

The following is a detailed answer to the 1kg powder water-soluble fertilizer packaging machine, covering price, selection, usage steps and precautions:

I. Price of 1kg Powder Water-Soluble Fertilizer Packaging Machine (Key Factors: Degree of Automation + Material)

Type: Price Range: Features

Semi-automatic: 12,000 to 30,000 yuan. Manual bagging + manual start-up, screw filling, accuracy ±1 to 2g, efficiency 20 to 40 bags per minute.

Fully automatic: 50,000 to 150,000 yuan. Automatic bagging, weighing and sealing. Servo control, accuracy ±0.5g, efficiency 40 to 60 bags per minute (e.g. DCS-1KG).

High-end customization: 150,000-300,000 yuan. Integrated weight checking, nitrogen preservation, robot palletizing. Made of 304 stainless steel, in compliance with GMP standards.

Note: If the fertilizer is corrosive (such as containing trace elements), 304 stainless steel material is required, and the price will increase by 20% to 30%.

Ii. Key Parameters for Selecting a 1kg Powder Water-Soluble Fertilizer Packaging Machine

1. Weighing method: Spiral feeding, suitable for powders with good fluidity, low price, but slightly lower precision.

2. Packaging speed: 180-600 bags per hour

Iii. Operating Steps for the 1kg Powder Water-Soluble Fertilizer Packaging Machine

1. Preparatory work

Material handling: Powdered water-soluble fertilizers need to pass through a 60-80 mesh sieve to ensure there is no caking (anti-caking agents can be added). The humidity should be controlled at less than 5% (high humidity can easily cause the screw to stick).

Equipment debugging: Calibrate the load cell (using a 1kg standard weight). Set parameters: Filling speed (such as 50% of the initial value), sealing temperature (about 180℃ for aluminum foil bags).

2. Operating procedures

1. Startup: Turn on the power → Adjust the air pressure to 0.6MPa→ Select "1kg formula" on the touch screen.

2. Trial run: Run 3 to 5 bags empty and check for weight error (if it exceeds ±1g, adjust the screw speed or the amplitude of vibration feeding).

3. Formal production: Fully automatic mode: Workers only need to replenish the roll film and materials, and the equipment will automatically complete the process: bag loading → filling → heat sealing → output (automatic alarm for faults).

Iv. Common Problems and Solutions of 1kg Powder Water-Soluble Fertilizer Packaging Machine

Problem, cause and solution

Large weight fluctuations, poor powder fluidity or screw wear: Add a flow agent (such as silica) + replace the screw liner.

Sealing powder leakage: Insufficient temperature or unsuitable film material. Increase the temperature (+10℃) or replace with high-temperature resistant film (such as PET/PE).

Dust pollution, poor sealing of equipment, installation of negative pressure dust collection devices (such as small bag filters).

V. Precautions

Safety: Powdered water-soluble fertilizer may be flammable. The equipment needs to be grounded and designed with anti-static features.

Cost control: If the budget is limited, you can purchase a semi-automatic machine first and install an automatic bag-loading device later (the upgrade cost is approximately 20,000 yuan).

If you need an accurate quotation for a 1kg powder water-soluble fertilizer packaging machine, it is recommended to provide the following information: hourly production, packaging bag material (such as aluminum foil, PE), and whether additional functions (coding, weight checking) are required.