How much is a set of large granular crystal packaging machine for powder water-soluble fertilizer

The price of a powder water-soluble enlarged granular crystal packaging machine usually ranges from 30,000 to several hundred thousand yuan per set. The specific price is affected by factors such as the degree of automation, production capacity, brand and configuration of the equipment. The following is the analysis of the key factors influencing prices and the price range by Zhengzhou Hanke Machinery:

I. Overview of the Price Range of large granular crystal packaging machines for Powder Water-soluble Fertilizers

1. Basic semi-automatic packaging machine

Price: 30,000 to 80,000 yuan per set

Features: Manual feeding and manual sealing, suitable for small-scale production (such as 500 to 1000 packs per hour).

Applicable scenarios: Start-up enterprises or users with low budgets, where production capacity requirements are not high.

2. Standard fully automatic packaging machine

Price: 80,000 to 200,000 yuan per set

Features: Automatic metering, bag-making, filling and sealing, with a production capacity of approximately 2,000 to 5,000 bags per hour and an accuracy of ±1% to 2%.

Applicable scenarios: Medium-sized enterprises that need to balance efficiency and cost.

3. High-end customized production lines

Price: 200,000 to 500,000 yuan + per set

Features: Fully automatic assembly line, including moisture-proof, dust-proof, multi-level metering (such as 5-50kg large packaging), and can be connected to robot palletizing.

Applicable scenarios: Large-scale production or special processes (such as hygroscopic crystals, highly corrosive raw materials).

Ii. Key Factors Affecting the Price of Powder water-soluble fertilizers with Large granular crystal packaging machines:

1. Degree of automation

2. Packaging specifications and production capacity

3. Materials and Anti-corrosion

4. Brand and After-sales Service

Iii. Suggestions for Purchasing large granular crystal packaging machines for powder water-soluble fertilizers

1. Clarify requirements: Provide parameters: particle size (e.g., 2 to 5mm), hourly output (e.g., 2 tons), packaging form (bagged/barreled).

2. Supplier Comparison: Request quotations from multiple suppliers (with configuration lists attached), and focus on comparing measurement accuracy (such as ±0.5%vs±1.5%) and after-sales response time.

3. Trial operation and factory inspection: It is required to conduct trial operation with actual materials.

It is recommended to provide specific parameters when contacting the equipment manufacturer to obtain an accurate quotation. If you need to recommend a manufacturer or provide further technical consultation, you can continue to communicate after adding the details.