How to purchase a 4-chamber static batching machine for a microbial agent factory? How much is a set

1. Price reference for the 4-chamber static batching machine for microbial bacteria

The price of a 4-chamber static batching machine is influenced by multiple factors and varies greatly, usually ranging from 50,000 to 150,000 RMB.

Key factors influencing prices

1. Material (core factor) :

Carbon steel material: Base choice, the lowest price, approximately 50,000 to 80,000 yuan. However, the raw materials of microbial agents may be corrosive, which will affect their service life. Stainless steel contact parts: The silos and conveyors that come into contact with materials are made of stainless steel (such as 304 stainless steel), with a moderate price, approximately 80,000 to 120,000 yuan. This is the most common and recommended choice for microbial agent factories, featuring anti-corrosion and easy cleaning.

All stainless steel material: The main parts of the entire equipment are made of stainless steel, with the highest anti-corrosion grade and the highest price, approximately over 120,000 yuan. It is suitable for occasions with extremely strict hygiene requirements.

2. Weighing system and degree of automation

Semi-automatic/economy type: Manual control of material discharge, electronic scale weighing, relatively low price.

Fully automatic type: Equipped with PLC+ touch screen, it can preset multiple formulas, automatically control the feeding, measurement and mixing of each bin, with high precision (error can reach ±0.1% to 0.3%), but the price is relatively high.

3. Silo capacity: The larger the capacity of each silo (such as 1m³, 2m³, 3m³), the higher the price will be accordingly.

Conclusion: For microbial agent factories, it is recommended to choose the configuration of "stainless steel contact parts + fully automatic control system", with a budget of approximately 80,000 to 120,000 yuan. This is the best choice in terms of cost performance and practicality.

Ii. How to Purchase a 4-Chamber Static Batching Machine for Microbial Bacteria (Key Points and Process for Selection

The production of microbial agents has extremely high requirements for the accuracy and hygiene of the proportioning. Special attention should be paid when purchasing.

Key points for selection

1. Anti-corrosion and rust prevention of materials: It must be emphasized that the parts in contact with materials should be made of 304 or 316 stainless steel to prevent rusting and contamination of bacteria and agents, and to facilitate cleaning and disinfection.

2. Weighing accuracy: The bacterial agent formula has extremely high requirements. It is necessary for the manufacturer to provide accuracy guarantees (such as static accuracy ±0.1%) and to understand the brand of the sensor used.

3. Software Functions: The control software should be capable of storing a large number of formulas, having permission management, and data recording and traceability functions (recording data for each batch of ingredients), which is crucial for quality control.

4. Factory compatibility: Measure the dimensions of the workshop entrance and installation positions accurately to ensure that the equipment can be smoothly delivered and installed.

Purchase process

1. Clear requirements:

Determine the main raw materials (such as carriers: bran, peat; strains: powder or liquid).

Determine the daily/hourly production requirements.

Determine the budget range.

2. Search for suppliers

3. Communication and Acquisition of Solutions

4. Factory Inspection

5. Signing the contract

6. Acceptance and Training:

Iii. Differences from the previously mentioned "Dynamic Batching Machine"

Static batching: Each material is weighed in sequence and separately in one main scale hopper. After all the materials are weighed, they are unloaded at one time. High precision, suitable for materials with complex formulas, high value and strict proportioning requirements (such as microbial agents, pharmaceuticals, high-end feed).

Dynamic batching: All materials are simultaneously and proportionally conveyed continuously and measured for mixing in real time. It is highly efficient and suitable for bulk materials with relatively simple formulas and slightly lower precision requirements (such as the main ingredients of conventional organic fertilizers).

For the production of microbial agents, static batching machines are far more suitable than dynamic batching machines due to their high precision and the feature of avoiding cross-contamination.

As a direct seller of automatic batching and packaging production lines, Zhengzhou Hanke Machinery is equipped with excellent technical and after-sales personnel. We strictly control every piece of equipment leaving the factory to meet the production needs of users. If you want to know the specific price of the 4-chamber static batching machine, please call 17319777703. We can help you purchase the suitable equipment as soon as possible!