Biological Biomass Pellet Packaging Scale Calibration and Usage Guide

The calibration and use of the biomass pellet packaging scale basically means making this machine obediently and accurately load each bag of fuel. Now, Zhengzhou Hanke Machinery will directly talk to us about the key points, explaining how to operate it in practice.

Let's start by discussing how to calibrate the biomass pellet packaging scale:

Reset to zero: First, clear all the particles in the hopper of the packaging scale. Start the equipment to let the system run empty, and ensure that the numbers displayed on the screen return to zero steadily. This step is fundamental.

2. Hanging weights or physical testing: This is crucial. You can attach standard weights to the sensor to check if the display shows consistent weight; a more direct method is to put a bag on, manually release a packet of particles, and then weigh it again on a scale. For example, if the package is set at 25 kilograms, the actual measurement comes out to be 25.2 kilograms.

3. Adjust parameters: If there is a deviation between the actual weight and the set value, locate the "Weight Calibration" or "Drop Difference Setting" menu on the touch screen (instrument). Input the measured deviation value. For materials with good fluidity, pay special attention to adjusting the "Advance Amount" (also known as Drop Difference Compensation), so that the machine automatically slows down or stops just before reaching the set weight, avoiding overloading.

4. Final verification: After adjusting the parameters, conduct a series of tests on three or five bags to ensure that each bag is within the error range. Once this is confirmed, the calibration process is considered complete.

Let's talk about the daily usage method of the biomass pellet packaging scale:

Before starting, first check if there is any material in the granular storage bin and whether the power and air sources are connected. Set the target weight per bag (for example, 25kg) and the packaging speed on the touch screen. Put the empty bags on the bag clamping device. Once the bag is sensed, press the start button with both hands (this is a safety design). The biomass pellet packaging scale will automatically complete the process of fast addition, slow addition, weighing, and discharging. After the bag is filled and drops down, the sealing machine will seal the bag. During use, pay attention to observing the weight fluctuations on the display screen. If you find that the weight fluctuates frequently, it could be that there are foreign objects in the pellets blocking the discharge port, or the material level is too low and the supply is unstable.

One final reminder: The particles are dusty. Please remember to regularly clean the dust from the control cabinet and sensors. This directly affects the weighing accuracy and the lifespan of the equipment.

When using it, be careful to prevent the particles from forming lumps and blocking the discharge port. Regular cleaning of the sensor is sufficient. Many people encounter problems such as inaccurate calibration and slow packaging speed after calibration. In fact, most of these issues are caused by poor operation details. Do you want to know how Zhengzhou Hanke Machinery's packaging scale can avoid these problems and achieve precise and efficient packaging easily? Please call 17319777703.